Specifications

General Configuration Command Set
Managing Switch Configuration Files
Matrix E1 Series (1G58x-09 and 1H582-xx) Configuration Guide 3-63
3.2.5.3 configure
Use this command to execute a previously downloaded configuration file, schedule a configuration
update for a later time, cancel a configuration update, or display scheduled configuration update
information.
configure {[filename [append] [at time] [in time] [reason reason] | show | cancel}
Syntax Description
Command Type
Switch command.
Command Mode
Read-Write.
Command Defaults
• If append is not specified, the current running configuration will be replaced
with the contents of the configuration file.
• If an at time or in time are not specified, the configuration will be updated
immediately.
• If a reason is not specified, none will be applied.
filename Specifies the name of the configuration file to execute.
append (Optional) Executes the configuration as an appendage
(update) to the current configuration.
at time (Optional) Schedules a configuration update at a specific
time using a 24-hour system (hh:mm).
in time (Optional) Schedules a configuration update after a specific
time in hours and minutes using a 24-hour system (hh:mm).
reason reason (Optional) Specifies a reason (text string) for updating the
configuration.
show Displays information about a scheduled configuration
update.
cancel Cancels a scheduled configuration update.