Specifications

Restore Wizard
Use the Restore Wizard to restore saved (archived) device configuration files to one or more devices. Saved
configurations are listed in the left−panel Archive Mgmt tab under the appropriate archive and version. Each
configuration displays an icon that identifies the type of data that was saved: device configuration data,
capacity planning data, both device configuration and capacity planning data. Only configurations that
include device configuration data ( and ) are available to be restored.
A configuration can only be restored to a device with the same IP address. In other words, the device you are
restoring to must have the same IP address as the device the configuration was originally saved from. You can
restore configurations to a single device or multiple devices. You must have a TFTP or FTP server running to
restore a configuration. For more information, see TFTP Server Setup or FTP Server Setup.
To access the wizard, select Tools > Wizards > Restore Wizard from the menu bar or click on
the toolbar.
Archive Version Selection Window
Use this window to select an archive version or single configuration to restore. If you select an archive
version, you can use the Remove button to remove any individual configurations included in the archive
version that you do not wish to restore.
Click the graphic for more information.
Restore Wizard 485