Specifications

Enter the amount of time (in seconds) until the device resets after the reset operation begins. For
example, if you start the reset operation at 4:00 pm with a 7 hour reset delay (420 seconds), the
device(s) will reset at 11:00 pm. This allows you to schedule your resets for a time when the network
is least busy.
Reset Type
Select the type of reset: Warm boot (restarts the device) or Cold boot (same as turning device power
off and on).
Elapsed Time
The amount of time in minutes:seconds since the reset operation started.
Start Button
Starts the timed resets. Resets occur simultaneously. Once the reset operation has started, you must
click Refresh to update the device information in the table.
Refresh Button
Once the reset operation has started, use the Refresh button to update the device information in the
table.
Reset Devices: Timed Reset Not Supported Window
Use this window to reset those devices that do not support Timed Reset. Devices will be reset one at a time,
waiting until a device is fully booted before beginning the next device.
Click the graphic for more information.
Welcome to NetSight Inventory Manager Help
Reset Devices: Timed Reset Not Supported Window 482