Specifications

TIP: If you open the Reset Device Wizard from a device or device group in the left−panel
Network Elements tab, the selected device(s) will be automatically displayed in the
Selected Devices table.
Selected Devices
Lists the devices selected for the reset operation. Devices that do not support the reset operation or have never
been contacted, are not listed. If you want to remove a device from the table, select the device and click
Remove.
IP Address
The device's IP address. Note that chassis that support Distributed Forwarding Engines (DFEs), such
as the Matrix N−Series, display a single management IP even though there may be multiple DFE
modules in the chassis.
Device Type
The device's model number or hardware type.
Firmware Version
The current firmware version installed in the device.
Firmware Download
A indicates the device supports the ability to download firmware using the Firmware Upgrade
Wizard.
Boot PROM Version
The current version of Boot PROM installed in the device.
Boot PROM Download
A indicates the device supports the ability to download boot PROM images using the Boot PROM
Upgrade Wizard.
Add Button
Select a single device or device group, or multiple devices or device groups, and click Add to add
them to the Selected Devices table.
Remove Button
To remove a device from the Selected Devices table, select the device and click Remove.
Reset Devices: Timed Reset Supported Window
Use this window to reset those devices that support Timed Reset. Timed Reset gives you the flexibility to set
up your reset operation with a time delay, so that the actual device resets take place at a later time. This can be
useful when trying to schedule resets for a time when the network is least busy.
Click the graphic for more information.
Welcome to NetSight Inventory Manager Help
Reset Devices: Timed Reset Supported Window 480