Specifications

Once the reset operation has started, use the Refresh button to update the device information in the
table.
Reset Devices: Timed Reset Not Supported Window
Once the downloads have completed, use this window to reset those devices that do not support Timed Reset.
Devices will be reset one at a time, waiting until a device is fully booted before beginning the next device.
NOTE: During the device reset, Inventory Manager learns the current firmware version installed
on the device. Inventory Manager uses this information to determine whether the
firmware version installed on the device matches the firmware reference image set for the
device's binary family. (This information is displayed in the All Devices Details View
tab.) If the version number is not available from an image file, you can manually set the
version number in the Firmware Image General Tab.
Click the graphic for more information.
Show devices that failed firmware upgrade
Select this checkbox to include devices that failed the firmware upgrade.
Device List Table
Lists those devices that do not support timed reset. Once the reset operation has started, you must
click Refresh to update the device information in the table.
Selected − Use the checkboxes in this column to select or deselect devices to be reset.•
Running New Firmware − Following the reset, a indicates the device is running the new
firmware version. (The checkmark is only displayed if the firmware version changes.)
Remember to click Refresh to update the information in the table following the reset.
•
IP Address − The device's IP address. Note that chassis that support Distributed Forwarding
Engines (DFEs), such as the Matrix N−Series, display a single management IP even though
•
Welcome to NetSight Inventory Manager Help
Reset Devices: Timed Reset Not Supported Window 435