Specifications

operation. When selecting your devices, make sure that any device with SNMP context has access
to the required MIBs, or select the device with default context (switch mode).
Click the graphic for more information.
Select devices to upgrade
This panel displays your current devices as they are listed in the left−panel Network Elements tab. Expand the
folders and select the single device or device group, or multiple devices or device groups (using the Control or
Shift keys) that you want to upgrade. Click the Add button to add the devices to the Selected Devices table. If
there were devices that failed the previous upgrade, use the Add Failed button to add those devices to the
table.
TIP: If you open the Firmware Upgrade Wizard from a device or device group in the left−panel Network
Elements tab, the selected device(s) will be automatically displayed in the Selected Devices table.
Selected Devices
Lists the devices selected for the upgrade operation. Devices that do not support firmware download or have
never been contacted, are not listed. If you want to remove a device from the table, select the device and click
Remove.
IP Address
The device's IP address. Note that chassis that support Distributed Forwarding Engines (DFEs), such
as the Matrix N−Series, display a single management IP even though there may be multiple DFE
modules in the chassis.
Device Type
The device's model number or hardware type.
Welcome to NetSight Inventory Manager Help
Firmware Upgrade Wizard 426