Specifications

If your server is configured with a root directory, it must match the
root directory entered here.
•
If your server is not configured with a root directory, specify the root
directory here as the root of the drive (e.g. C:\ or D:\).
•
Transfer Protocol
The transfer protocol for the alternate firmware server. You cannot edit this property. To change the
transfer protocol, you must remove this alternate server from the list, and add a new one using the
Add Alternate Firmware Server window.
TFTP Connection Information
This area displays connection information for an alternate server that has been configured with TFTP
protocol.
Port
The port number your TFTP server is configured to run on. You cannot edit this property. To change
the port number, you must remove this alternate server from the list, and add a new one using the Add
Alternate Firmware Server window.
FTP Connection Information
This area displays connection information for an alternate server that has been configured with FTP protocol.
Port
The port number your FTP server is configured to run on. You cannot edit this property. To change
the port number, you must remove this alternate server from the list, and add a new one using the Add
Alternate Firmware Server window.
Anonymous
Select or deselect this checkbox depending on whether your FTP server is configured to accept
Anonymous logins.
Username/Password
Edit the username and password used to access the FTP server. If you select the Hide Password
checkbox, your password will be replaced with asterisks when it is typed in.
Buttons
OK
Makes the changes and closes the window.
Apply
Makes the changes and leaves the window open.
Welcome to NetSight Inventory Manager Help
Edit Alternate Firmware Server Window 414