Specifications

button in the upper left corner of the table (if you have the row count column
displayed). For more information, see Table Tools.
Status Summary
Once the download is started, this area updates with status information for the download operation.
Download Type
The downloads will be performed in parallel (simultaneously) on the number of devices specified in
the Groups of field. Enter the value 1 to have the downloads performed serially, one device after
another.
Start Button
Initiates the download operation. The table at the top of the window updates with status information,
as will the status area in the bottom left of the window.
Reset Devices: Timed Reset Supported Window
Once the downloads have completed, use this window to reset those devices that support Timed Reset. Timed
Reset gives you the flexibility to set up your reset operation with a time delay, so that the actual device resets
take place at a later time. This can be useful when trying to schedule resets for a time when the network is
least busy.
NOTE: During the device reset, Inventory Manager learns the current boot PROM version
installed on the device. Inventory Manager uses this information to determine whether
the boot PROM version installed on the device matches the boot PROM reference image
set for the device's binary family. (This information is displayed in the All Devices
Details View tab.) If the version number is not available from an image file, you can
manually set the version number in the Firmware Image General Tab.
Click the graphic for more information.
Welcome to NetSight Inventory Manager Help
Reset Devices: Timed Reset Supported Window 390