Specifications

If your server is not configured with a root directory, specify the root
directory here as the root of the drive (e.g. C:\ or D:\).
•
Transfer Protocol
Specify the transfer protocol for the alternate server and then enter the connection information in the
section below.
TFTP Connection Information
Use this area to specify connection information for an alternate server that has been configured with TFTP
protocol.
Port
Specify the port number your TFTP server is configured to run on.
FTP Connection Information
Use this area to specify connection information for an alternate server that has been configured with FTP
protocol.
Port
Specify the port number your FTP server is configured to run on.
Anonymous
Select this checkbox if your FTP server is configured to accept Anonymous logins. Inventory
Manager will automatically fill in the username and password fields.
Username/Password
Enter your username and password to access the FTP server. If you select the Hide Password
checkbox, your password will be replaced with asterisks when it is typed in.
Buttons
OK
Adds the server to the list of alternate firmware download servers and closes the window.
Apply
Adds the server to the list of alternate firmware download servers and leaves the window open so you
can add another server.
Welcome to NetSight Inventory Manager Help
Add Alternate Firmware Server Window 354