Specifications

Add Alternate Firmware Server Window
Use the Add Alternate Firmware Server window to configure properties for alternate firmware download
servers and specify connection information based on the selected transfer protocol. Access this window by
clicking Add Server in the Alternate Firmware Servers view of the Options window.
Click the graphic for more information.
Server Properties
Use this area to specify the alternate server's IP address, identifier, and transfer protocol, and set the path to
the root directory.
Server IP
Enter the IP address of the workstation where the tftp or ftp server is running.
Identifier
Enter a description that helps you identify the alternate server.
Server Root Path
Specify the server root path. The root directory is the base directory to which the server is allowed
access. The server will be allowed to create files to or read files from this directory and any of its
subdirectories.
NOTE: Keep in mind the following requirements when setting the server root path:
If your server is configured with a root directory, it must match the root
directory entered here.
•
Add Alternate Firmware Server Window 353