Specifications

The physical layer address assigned to the interface through which Inventory Manager is
communicating. MAC addresses are hard−coded in the device, and are not configurable.
System Name
The assigned name of the device as stored in the device's sysName MIB object.
System Contact
The name of the person responsible for the device as stored in the device's sysContact MIB object.
System Location
The physical location of the device as stored in the device's sysLocation MIB object.
Asset Tag
A unique asset number assigned to the device for inventory tracking purposes. Enter a number and
click Save. The asset tag will be stored in the Inventory Manager database and on the device. If
Inventory Manager could not store the asset tag on the device, an asterisk (*) will show up in the asset
tag field indicating that the asset tag was saved only to the Inventory Manager database.
Chassis Slot
The slot number in the chassis where the device resides. N−Series devices and devices that do not
reside in a chassis, display a value of N/A.
Chassis ID
The ID assigned to the chassis where the device resides. This is usually a serial number or MAC
address, depending on the chassis type.
Serial Number
A unique number assigned to the device by the manufacturer.
System Description
Description of the piece of equipment, including its manufacturer, model number, and firmware
revision number.
Last Known Status
The device's last known connection status (Contact or No Contact) and, therefore, its ability to
respond to SNMP requests. The status is updated each time you select the device in the left−panel
Network Elements tab.
Uptime
The amount of time, in a days hh:mm:ss format, that the device has been running since the last
start−up.
Firmware Version
Shows the current firmware version installed in the device.
Boot PROM Version
Shows the current version of Boot PROM installed in the device.
CPU
The name of the device's processor (Central Processing Unit).
Welcome to NetSight Inventory Manager Help
General Tab (Device) 331