Specifications

IP Address
The IP address of the device whose data was saved, followed by the SNMP context, if applicable.
Version
The date and time that the archive operation was performed.
Operation Status
The status of the operation: Success or Failure.
Description
When a configuration file is saved, it is automatically compared to the previously saved configuration
file for the same device. This field displays a message regarding that comparison. For archive
operations that are configured to archive only capacity planning data (and not configuration data), this
column will display a Warning message stating that the ability to archive configuration data has been
disabled for this archive.
Memo
Use this field to add additional notes about the configuration and save them using the Save button.
Configuration Archive
This section indicates whether device configuration data was saved when the archive was performed. Device
configuration data is saved as a .cfg config file, and information about that file is displayed here. You can
select whether or not to save device configuration data when you create an archive using the Archive Wizard,
or when you edit an archive using the Archive General Tab.
Device Status
The status of the device at the time the archive operation was performed: Contact or No Contact.
File Status
The status of the config file: File Found or File Not Found/Missing. File Not Found/Missing indicates
that Inventory Manager can no longer find the config file (it has been deleted or moved) or the archive
operation did not include saving device configuration data. Check the Description field for more
information.
File Name
The path and filename for the saved configuration. For archive operations that are configured to
archive only capacity planning data (and not configuration data), this column will be blank.
File Time Stamp
The date and time the configuration file was created. For archive operations that are configured to
archive only capacity planning data (and not configuration data), this column will be blank.
Contains Custom Attributes
Indicates whether the device's custom attributes were saved when the archive was performed. These
attributes are displayed in a configuration's Custom Attributes tab. If the device type does not support
custom attributes or if the archive was not successful, this field will display "No."
Capacity Planning
This section indicates whether the device's port and FRU information was saved when the archive was
performed. This information is used by the Capacity Planning tool to generate reports. You can select whether
Welcome to NetSight Inventory Manager Help
General Tab (Configuration) 328