Specifications

In order to provide this information, Inventory Manager compares the name and version
number of the reference image file to the current boot PROM on the device. The version
number must be available from the reference image file and the current boot PROM on
the device must have been installed at some point via an Inventory Manager Boot PROM
Upgrade Wizard operation that included a device reset. Otherwise, this column may be
blank even though the boot PROM version installed on the device may actually match the
reference image. If the version number is not available from an image file, you can
manually set the version number in the Firmware Image General Tab.
MAC Address
The physical layer address assigned to the interface through which Inventory Manager is
communicating. MAC addresses are hard−coded in the device, and are not configurable.
Device Type
The device's model number or hardware type.
System Name
The assigned name for the device.
System Contact
The person responsible for the device.
System Location
The physical location of the device.
Asset Tag
A unique asset number assigned to the device for inventory tracking purposes.
System Description
Description of the piece of equipment, which may include its manufacturer, model number, and
firmware revision number.
Chassis Slot
The slot number in the chassis where the device resides. N−Series devices and devices that do not
reside in a chassis, display a value of N/A.
Chassis ID
The ID assigned to the chassis where the device resides.
Serial Number
A unique number assigned to the device by the manufacturer.
CPU
The name of the device's processor (Central Processing Unit).
Memory
The device's total installed local memory, DRAM (Dynamic Random Access Memory), reported in
megabytes (MB).
File Transfer Method
Welcome to NetSight Inventory Manager Help
Details View Tab(All Devices Folder) 285