Specifications

A unique asset number assigned to the device for inventory tracking purposes. The asset tag is defined
in the device's General Tab.
Chassis ID
The ID assigned to the chassis where the device resides (if applicable). This is usually a serial number
or MAC address, depending on the chassis type.
Chassis Slot
The slot number in the chassis where the device resides. N−Series devices and devices that do not
reside in a chassis, display a value of N/A.
Memory
The device's total installed local memory, DRAM (Dynamic Random Access Memory), reported in
megabytes (MB).
Firmware Version
The firmware version installed in the device at the time of the configuration save.
Firmware Change Count
The number of successful firmware image downloads. Devices that do not support the
enterasys−configuration−change−MIB will display N/A (Not Available).
Firmware Change Time
The date and time of the last successful firmware image download. Devices that do not support the
enterasys−configuration−change−MIB will display N/A (Not Available).
Firmware Change Method
The method that was used to cause the last firmware change (e.g. SNMP, Telnet, Local Management
(LM), Command Line Interface (CLI)). If the individual user login or the source IP address is
available, they are included. Devices that do not support the enterasys−configuration−change−MIB
will display N/A (Not Available).
Configuration Change Count
The number of successful configuration changes. Devices that do not support the
enterasys−configuration−change−MIB will display N/A (Not Available).
Configuration Change Time
The date and time of the last successful configuration change. Devices that do not support the
enterasys−configuration−change−MIB will display N/A (Not Available).
Configuration Change Method
The method that was used to make the last configuration change (e.g. SNMP, Telnet, Local
Management (LM), Command Line Interface (CLI)). If the individual user login or the source IP
address is available, they are included. Devices that do not support the
enterasys−configuration−change−MIB will display N/A (Not Available).
Configuration File Checksum
The checksum is a value calculated on the entire file. You can compare this value to values obtained
from different archive versions. Any difference in checksum values would indicate a change in the
configuration.
Welcome to NetSight Inventory Manager Help
Attributes Tab (Configuration) 267