Specifications

Show devices not supporting timed reset
This window lists those devices that support Timed Reset. Select this checkbox to include devices that
do not support timed reset. Devices that do not support timed reset cannot be reset from this window;
proceed to the next window to reset those devices.
Show devices that failed Boot PROM upgrade
Select this checkbox to include devices that failed the boot PROM upgrade.
Device List Table
A list of the devices you have selected for your reset operation. Once the reset operation has started,
you must click Refresh to update the device information in the table.
Selected − Use the checkboxes in this column to select or deselect devices to be reset.
Devices that do not support timed reset cannot be selected.
•
Running New Boot PROM − Following the reset, a indicates the device is running the
new boot PROM version. (The checkmark is only displayed if the boot PROM version
changes.) Remember to click Refresh to update the information in the table following the
reset.
•
IP Address − The device's IP address. Note that chassis that support Distributed Forwarding
Engines (DFEs), such as the Matrix N−Series, display a single management IP even though
there may be multiple DFE modules in the chassis.
•
Boot PROM Version − The current boot PROM version installed in the device. Following
the reset, the new boot PROM version will be displayed. Remember to click Refresh to
update the information in the table following the reset.
•
Device Status − The device's connection status (Contact or No Contact) and, therefore, its
ability to respond to SNMP requests.
•
Downloaded Image − The name of the image file that was downloaded.•
Welcome to NetSight Inventory Manager Help
Reset Devices: Timed Reset Supported Window 253