Specifications

The current firmware version installed in the device.
Firmware Download
A indicates the device supports the ability to download firmware images using the Firmware
Upgrade Wizard.
Boot PROM Version
The current version of Boot PROM installed in the device.
Boot PROM Download
A indicates the device supports the ability to download boot PROM images using this wizard.
Add Button
Select a single device or device group, or multiple devices or device groups, and click Add to add
them to the Selected Devices table.
Remove Button
To remove a device from the Selected Devices table, select the device and click Remove.
Assign Boot PROM Window
Use this window to select and assign the boot PROM images to be used in the upgrade. Images are assigned
according to device type or binary family (device types that share the same firmware image). The left panel
lists the device types selected for the boot PROM upgrade. The right panel lists boot PROM images
compatible with a selected device type. Use the Assign to: buttons to assign an image to a specific device type
or to the entire binary family. You must assign an image to each device type.
NOTE: Before proceeding with the upgrade, be sure to verify that the boot PROM and firmware images
that will be on the device after the upgrade operation are compatible. Refer to the boot PROM and
firmware release notes for more information.
Click the graphic for more information.
Welcome to NetSight Inventory Manager Help
Assign Boot PROM Window 248