Specifications

Firmware Version
The current firmware version installed in the device.
Firmware Download
A indicates the device supports the ability to download firmware images using this wizard.
Boot PROM Version
The current version of Boot PROM installed in the device.
Boot PROM Download
A indicates the device supports the ability to download boot PROM images using the Boot PROM
Upgrade Wizard.
Add Button
Select a single device or device group, or multiple devices or device groups, and click Add to add
them to the Selected Devices table.
Remove Button
To remove a device from the Selected Devices table, select the device and click Remove.
Add Failed Button
If there were devices that failed the previous firmware upgrade, click the Add Failed button to add
those devices to the Selected Devices table. This button will not be displayed if there are no devices
that failed the previous upgrade.
Assign Firmware Window
Use this window to select and assign the firmware images to be used in the upgrade. Firmware is assigned
according to device type or binary family (device types that share the same firmware image). The left panel
lists the device types selected for the firmware upgrade. The right panel lists firmware images compatible with
a selected device type. Use the Assign to: buttons to assign an image to a specific device type or to the entire
binary family. You must assign an image to each device type.
NOTE: Before proceeding with the upgrade, be sure to verify that the boot PROM and firmware images
that will be on the device after the upgrade operation are compatible. Refer to the boot PROM and
firmware release notes for more information.
Click the graphic for more information.
Welcome to NetSight Inventory Manager Help
Assign Firmware Window 236