Specifications

Reset Device Wizard
Use the Reset Device Wizard to reset a single device, multiple devices, or even multiple device groups. The
Reset Device Wizard allows you to reset devices that support Timed Reset as well as those devices that do
not. Timed Reset lets you configure your reset operation with a time delay, so that the actual device resets
take place at a later time.
To access the wizard, select Tools > Wizards > Reset Wizard from the menu bar or click on the
toolbar.
Device Selection Window
Use this window to select the devices to include in the reset operation.
NOTE: If you have multiple tree nodes representing the same device but with varying SNMP contexts,
keep in mind that not all device contexts will provide access to the MIBs required to perform the
operation. When selecting your devices, make sure that any device with SNMP context has access
to the required MIBs, or select the device with default context (switch mode).
Click the graphic for more information.
Select devices to reset
This panel displays your current devices as they are listed in the left−panel Network Elements tab. Expand the
folders and select the single device or device group, or multiple devices or device groups (using the Control or
Shift keys) that you want to reset. Click the Add button to add the devices to the Selected Devices table.
Reset Device Wizard 229