Specifications

Archives
This panel displays your current archives just as they are listed in the left−panel Archive Mgmt tab. Below
each archive name are the archive versions, displayed by the date and time the version was performed. Under
the versions are the individual configurations, listed by IP address of the device whose configuration was
saved. Each configuration displays an icon that identifies the type of data that was saved: device
configuration data, capacity planning data, both device configuration and capacity planning data. Only
configurations that include device configuration data ( and ) are available to be restored.
Expand the folders under the Archives tree and select the archive version or configuration you want to restore.
Click the Add button to add the configurations to the Configurations to Restore table.
TIPS: −− If you open the Restore Wizard from an archive version or configuration in the left−panel
Archive Mgmt tab, the selected configuration(s) will be automatically displayed under
Configurations to Restore.
−− Check the FW Match column to see if the current firmware version on the device matches the
firmware version that was on the device at the time of the archive.
Configurations to Restore
Displays the configurations you have selected to restore. Select a configuration and use the Remove button to
remove any individual configurations you do not wish to restore.
Configuration IP
The IP address of the device whose configuration was saved.
Welcome to NetSight Inventory Manager Help
Restore Wizard 225