Specifications

Display
Use these radio buttons to select how you would like the results data displayed.
Target Device Tree
Displays your target groups and devices. Your selection in the tree determines what results data will
be displayed in the table. For example, select a chassis group to see results for all the chassis in that
group, or select an individual chassis to see results for just that chassis. When you change your
selection in the tree, the table is updated with the relevant information. If you select an individual
device in the target device tree, the information displayed pertains to the chassis the device resides in.
Device Count, Sufficient Data
The total number of target devices, followed by the number of devices with sufficient data to report
results. If you generated the report using historical data, a device is counted as having sufficient data
if there is one archive used to obtain report results. Target devices that do not reside in chassis will be
counted as having insufficient data.
Table
The Show Data by Chassis table displays slot data for the selected chassis group or individual chassis. In most
cases, your report will be generated using current data. However, if you generated your report based on
historical data, the report will use device data saved in the last archive preceding the specified date. If there is
no archive for a target device, or the device does not reside in a chassis, that device will not be represented in
the report results.
Welcome to NetSight Inventory Manager Help
Slot Results Window 215