Specifications

port type, due to different media types and connectors being used.
The report is generated based on the first and last data samples in the time period selected. Results that are not
available are displayed as Unknown.
NOTE: In the port results, a port is considered used when there were two data samples consulted to
obtain report data and
the port's link status for either sample is LINK, or•
the port's link status for both samples is NO LINK, but the bytes transferred values for
both samples are not equal.
•
Port Type
The type of port: ATM, Ethernet, FDDI, WAN, or Other. Your selections in the Port Attributes
window determine the port types included in the report.
Description
A description of the port.
% Ports Used
The percentage of ports of that port type being used in the device group or on the individual device.
Total Ports
The total number of ports of that port type installed in the device group or on the individual device.
# Ports Used
The number of ports of that port type being used in the device group or on the individual device.
Ports Added
The number of ports of that port type added (during the specified time frame) to the device group or
to an individual device.
Ports Removed
The number of ports of that port type removed (during the specified time frame) from the device
group or from an individual device.
Media
The media being used by that port type.
Media Type
A detailed description of the media being used by that port type.
Framing
The start and stop bit that frame the data transmitted by that port type.
Speed
That port type's physical speed.
Connector
That port type's connector type.
Welcome to NetSight Inventory Manager Help
Port Results Window 203