Specifications
the port's link status for either sample is LINK, or•
the port's link status for both samples is NO LINK, but the bytes transferred values for
both samples are not equal.
•
Alert
A yellow alert icon in this column signifies that the report data for this table entry is questionable.
It indicates that:
there aren't enough data samples in the selected time period to generate report data. At least
two data samples (either two archives, or one archive and current data) are required for each
device. Devices with no data samples or only one data sample will display Unknown for some
or all of their results.
•
between the data samples ports were removed, and the port's link status in the first data
sample is NO LINK. This causes the validity of the data to be in question because there is no
way to determine if bytes had been transferred by a port before it was removed, and therefore
the report cannot accurately determine if the port is being used.
•
Rest your cursor on the alert to display a tooltip that describes the reason for the alert.
Name
The name of the group or the IP address of an individual device.
% Ports Used
The percentage of ports being used in the device group or on the individual device.
Total Ports
The total number of ports installed in the device group or on the individual device.
# Ports Used
The number of ports being used in the device group or on the individual device.
# Ports Unused
The number of ports not in use in the device group or on the individual device.
Ports Added
The number of ports added (during the specified time frame) to the device group or to an individual
device.
Ports Removed
The number of ports removed (during the specified time frame) from the device group or from an
individual device.
Port Results − Devices Only
The Devices Only view lets you view port data for each individual target device. Depending on your selection
in the tree, you can see report results for all the devices in a group, or for an individual device.
Click the graphic for more information.
Welcome to NetSight Inventory Manager Help
Port Results Window 199