Specifications

Select Targets Window
Use this window to select the target devices for your report and add filters to further refine the list of devices,
if desired. For example, you could target the Floor One device group, but filter out a single device you don't
want included in the report. Or, you could target the Building A device group, and filter in just one specific
device type. Once you have made your selections, you can view a list of the devices you have targeted for
your report to verify that your targets are correct.
NOTE: If you will be scheduling this Ports report, keep in mind when selecting your targets that results
from scheduled reports are delivered via e−mail. Depending on the number of target devices you
select and the number of ports on those devices, a ports report may generate results that are too
large to be delivered via e−mail. In this case, you should consider creating multiple reports based
on subnet or device type. This is primarily a concern when selecting the Port Details view for
your report results.
Click the graphic for more information.
Targets
This panel displays your Network Elements tree. Expand the tree to select the target device group or
individual device for your report.
Applied Filters
Welcome to NetSight Inventory Manager Help
Select Targets Window 192