Specifications

Use data collected as of
Report data will be collected based on the date selected here. Calculations are based on the last
archive preceding the specified date. Only archive operations that are configured to archive capacity
planning data will be used. If there is no archive for a target device, that device will not be
represented in the report results.
Retrieve current data from devices
The report will use current data from the target devices. Because this requires the report to gather
current data from the devices, extra time may be needed when results are calculated.
Submodule Results Window
Use this window to view the report data. The radio buttons at the top of the right panel let you select various
ways to display the report results:
Summary by Chassis −− reports submodule information summarized by individual chassis.•
Summary by Device Type −− reports submodule information organized by device type.•
Summary by Submodule Type −− reports submodule information organized by the type of
submodule.
•
All Submodule Details −− provides a description of each submodule and information about the device•
Welcome to NetSight Inventory Manager Help
Submodule Results Window 182