Specifications

For example, the 6E129−26 has two PIM slots, which would not be included in the definition
of a submodule. These PIMs would be reported as port FRUs.
Specify Time Window
Use this window to select a date from which report data will be gathered. In most cases, you will want to
generate the report using current data. However, you can also generate a report based on historical data. In
that case, the report will be generated using device data saved in the last archive preceding the specified date.
Only archive operations that are configured to archive capacity planning data will be used (see How to
Archive for more information.)
Click the graphic for more information.
Use data collected as of
Report data will be collected based on the date selected here. Calculations are based on the last
archive preceding the specified date. Only archive operations that are configured to archive capacity
planning data will be used. If there is no archive for a target device, that device will not be
represented in the report results.
Retrieve current data from devices
The report will use current data from the target devices. Because this requires the report to gather
current data from the devices, extra time may be needed when results are calculated.
Welcome to NetSight Inventory Manager Help
Specify Time Window 172