Specifications

Display
Use these radio buttons to select how you would like the results data displayed.
Target Device Tree
Displays your target groups and devices. Your selection in the tree determines what results data will
be displayed in the table. For example, select a device group to see Added FRUs for that group, or
select an individual device to see results for just that device. When you change your selection in the
tree, the table is updated with the relevant information.
Device Count, Sufficient Data
The total number of target devices, followed by the number of devices with sufficient data to report
results. A device is counted as having sufficient data if there were two data samples (either two
archives, or one archive and current data) used to obtain report data. This area also reports the number
of devices with FRU components that have been added or removed.
Table
The Added FRUs table displays FRU data for the selected device group or for the individual devices
contained in the group. The report is generated based on the first and last data samples in the time period
selected. Devices with no data samples or only one data sample, will not be represented in the report results.
IP Address
The IP address of the device reporting the added FRU component.
Welcome to NetSight Inventory Manager Help
Results Window 162