Specifications

Submodule −− an expansion module installed on an existing chassis module or standalone
device that adds ports to the existing device. This should not be confused with a Port Interface
Module (PIM), which adds media connectors to a module, submodule, or standalone device.
For example, the 6E129−26 has two PIM slots, which would not be included in the definition
of a submodule. These PIMs would be reported as port FRUs.
•
Specify Time Window
Use this window to select a time period from which report data will be gathered. The report will be generated
using device data saved in archive operations performed during the specified time period. Calculations are
based on the first and last archives (data samples) in the time period selected, not on all archive information in
the specified time frame. The archive operations must be configured to archive capacity planning data (see
How to Archive for more information.) You can also select to use current data from devices as one of your
data samples, in which case the report will use current data from the target devices, instead of the last archive
in the time period.
Click the graphic for more information.
For the Period
Select a time period for your report. The report is generated using device data saved in archive
operations performed on the targeted devices during the specified time period. Report information is
collected from the first and last archives (data samples) in the selected time period, not from every
Welcome to NetSight Inventory Manager Help
Specify Time Window 158