Specifications

FRU Types to Include
Use the checkboxes in this window to select specific FRU types for your report. Select the "Any"
checkbox for a report on all listed FRU types, or select individual FRU types of interest. Select the
"Other" checkbox if you wish to include data on FRU types other than the ones listed here. For the
purposes of this report, the FRU types are defined as follows:
Backplane −− a device for aggregating and forwarding networking traffic, such as a shared
backplane in a modular Ethernet switch. A backplane may be reported as a single physical
entity, even if it is actually implemented as multiple discrete physical components within a
chassis or stack.
•
Device −− a manageable networking device.•
Chassis −− an overall container for networking equipment.•
Control Module −− the module in a chassis that is responsible for maintaining route table and
bridge table information, as well SNMP management and system housekeeping functionality.
•
Fabric Module −− a switching fabric module that provides direct communication between
fabric−enabled line cards in a chassis.
•
Fan −− a fan or other heat−reduction component.•
Module −− a self−contained subsystem, such as a plugin card, daughter−card, or DFE
module.
•
Port −− a media connector added to a module, submodule, or standalone device.•
Power Supply −− a power−supplying component.•
Sensor −− a sensor such as a temperature sensor within a router chassis.•
Stack −− a stack of multiple chassis.•
Welcome to NetSight Inventory Manager Help
Select FRU Types Window 157