Specifications

using current data. However, if you generated your report based on historical data, the report will use device
data saved in the last archive preceding the specified date. If there is no archive for a target device, or the
device does not reside in a chassis, that device will not be represented in the report results.
NOTE: Devices that do not support certain components will display "Unsupported" in the results table
entry. If a chassis displays "Not Mapped" in its results table entry, it indicates that the device type
is not in the Capacity Planning data file. If you encounter the "Not Mapped" entry, please contact
Global Support for an updated data file for these devices.
Chassis
The chassis type followed by the ID assigned to the chassis. This is usually a serial number or MAC
address, depending on the chassis type.
IP Address
The IP address of the chassis or one of the devices in the chassis.
Type
The chassis model number or hardware type.
Submodule Capacity
The submodule capacity (based on the installed modules) for the chassis. If you have an individual
device selected in the Target Device Tree, this column reports information for just that specific
device.
Submodules Installed
The number of submodules installed in the chassis. If you have an individual device selected in the
Target Device Tree, this column reports information for just that specific device.
CM Capacity
The control module (CM) capacity for the chassis.
CMs Installed
The number of control modules (CM) installed in the chassis.
Slot Capacity
The slot capacity for the chassis.
Slots Installed
The number of modules installed in the chassis.
Fan Capacity
The fan capacity for the chassis.
Fans Installed
The number of fans installed in the chassis.
Power Supply Capacity
The power supply capacity for the chassis.
Power Supplies Installed
Welcome to NetSight Inventory Manager Help
Chassis Results Window 151