Specifications

Configuring the NetSight TFTP Service on a Client
A NetSight TFTP service is installed on a client workstation as part of the Client−Only configuration. This
client−side NetSight TFTP service provides an alternate firmware download capability for remote devices. It
allows a remote client to perform a firmware download without having to reconfigure the default NetSight
TFTP server settings.
On the remote client, select Tools > Options in the menu bar. The Options window opens.1.
In the left−panel tree, expand the Inventory Manager folder and select Services for NetSight Client.
(This view is only available for clients connected to a remote server.)
2.
Configure your TFTP settings.
Specify the Root Directory Path. The root directory is the base directory to which the TFTP
server is allowed access. The TFTP server will be allowed to create files to or read files from
this directory and any of its sub−directories. The default root directory is the tftpboot
directory that Inventory Manager automatically creates when it is installed. If you would like
to use a different root directory, enter a path to that directory in this field, or use the Browse
button to navigate to the directory.
NOTE: Changing the TFTP root directory requires restarting the TFTP server.
a.
If your workstation is configured with multiple IP addresses, enter the appropriate IP address
in the TFTP Server IP Address field.
b.
3.
If desired, select the Automatic Launch checkbox for the NetSight TFTP service.4.
Click OK to set options and close the window.5.
The client−side NetSight TFTP server must be configured as an alternate server before it can be used
to download firmware. Refer to How to Set Up Alternate Firmware Download Servers for complete
instructions.
6.
Welcome to NetSight Inventory Manager Help
Configuring the NetSight TFTP Service on a Client 121