Installation guide

Enterasys Matrix Security Module Installation Guide C-1

Upgrading Enterasys Sentinel

Trusted Access Gateway Software

ThisAppendixdescribestheproceduretoupgradetheEnterasysSentinelTrustedAccess

GatewaysoftwareontheMSMmodule.

1. GototheEnterasysNetworkswebsitetodownloadtheTAG.zipfileto yoursystem:

http://www.enterasys.com/products/management/downloads

2. ExtracttheTAG.zipfiletoadirectoryonyoursystem.

3. InserttheUSBflashdrivethatcamewith

theMSMmoduleintotheUSBportonyour

system,andnotethedriveletteritisassigned.

4. Openacommandpromptwindowandcdtothedirectorywhereyouextractedthe

TAG.zipfile.

5. Type

make_disc.bat <drive letter>:andpressEnter.

ThefileswillbecopiedtotheUSBflashdrive.Whenthecopyiscompleteyouwillsee

themessage“Successfullyinstalledinto<driveletter>:Pressanykeytocontinue.”

6. RemovetheUSBflashdrivefromyoursystem.

7. InserttheUSBflashdriveintotheUSBporton

theMSMmodule.

8. ReboottheMSMmodule,andthenpressF2togototheBIOSsetup.

9. UsethearrowkeystonavigatetoBOOToption.

10. EnsurethattheUSBflashdriveislistedasPriority1.Ifitisnot,moveittoPriority1.

11. SaveonExit.

12. TheMSMmodulestarts

bootingfromtheUSBflashdrive.

13. Whenthebootiscomplete,theApplianceInstallationscreenappears.

SelectMSMastheappliancetype,andpressEnter.Theinstallationbegins.

14. Aftertheinstallationcompletes,reboottheMSMmoduleandthenremovetheUSB

flashdrive.