Installation guide

B-2 Upgrading Dragon Software
16. Typemount /dev/sr0 /cdrom,andpressEnter.
17. Type
/sbin/install dsm,andpressEnter.
18. EnsurethattheCDisremoved.
19. Type reboot,andpressEnter.
20. DisconnecttheUSBCD‐ROMdrive.
21. ReconnecttheUSBconnectortotheMSM.
TheDragonloginscreenappears.
22. RefertotheDragonIntrusionDefenseSystemInstallationGuideforinstallation
proceduresandlicensekeyinformation.
Note: There must be a space between sr0 and /cdrom.
Notes:
• You may need to cd to sbin, and then enter install dsm.
• The installation will take approximately ten minutes.
• Verify that the LED is red, or flashing red, on the appliance.
• When the installation is complete:
– The CD should eject. If the CD does not eject automatically, you must manually
remove the CD.
– You are returned to prompt.