Installation guide

Enterasys Matrix Security Module Installation Guide B-1
B
Upgrading Dragon Software
ThisAppendixdescribestheproceduretoupgradetheDragonIntrusionDefenseSystem
software.
1. Ifyoudon’talreadyhave auseraccount,youmustcreateone.Referto“CreateaUser
Account”onpage 3‐2forinstructions.
2. GototheEnterasysNetworkswebsitetodownloadtheEnterasysDragonimageto
burn
ontoaCD,https://dragon.enterasys.com
3. ClickonReleaseSoftwarelocatedontheleftsideofthepage.
4. ClickonthelatestDragonX.XDownload.Thelatestreleaseisusuallyatthetopofthe
page.
5. DownloadtheISOimagefiletoasystem.
6. BurntheimageontoaCD.
7. AttachtheUSBCD‐
ROMdrivetotheUSBportontheMSM.
8. AccesstheMSMusingyouraccessmethod(forexample,serialconsoleorTelnet).
9. Pressthepowerbutton,andthenpressF2togototheBIOSsetup.
10. UsethearrowkeystonavigatetoBOOToption.
11. EnsurethatUSBCD‐ROMdriveis
listedasPriority1.Ifitisnot,moveittoPriority1.
12. SaveonExit.
13. InserttheCDintotheUSBCD‐ROMdrive.
14. TheMSMstartsbootingfromtheUSBCD‐ROM.
Whenbootingiscomplete,theDragonApplianceInstallationscreenappears.
15. SelectDSM‐DragonSecurityModule‐DaughterCardfrom
themenuoptions.
Youarereturnedtotheprompt.
Note: To upgrade, you must have a CD-ROM to burn the image onto, and a CD-ROM
drive with a USB connector to connect to the MSM.