Installation guide

Enterasys Matrix Security Module Installation Guide 3-3
6. Enteryournewpassword,andthenpressEnter.
7. Re‐enteryournewpassword,andthenpressEnteruntilyougettotheConfigure
Networkscreen.
8. IntheConfigureNetworkscreen,pressEntertoacceptYes.
TheHostnamescreenappears.
9. Enterahostname,andthenpressEnter.
TheIPConfigurationTypescreenappears.
10. Select
yourIPtype,andthenpressEntertoacceptOK.
TheIPAddressscreenappears.
11. EntertheIPaddressoftheappliance,andthenpressEntertoacceptOK.
TheNetmaskscreenappears.
12. Enterthenetmaskoftheappliance,andthenpressEntertoacceptOK.
TheGatewayAddressscreenappears.
13. Enteryour
gatewayaddress,andthenpressEntertoacceptOK.
TheUseaNameServerscreenappears.
14. PressEntertoacceptYes.
TheSelectNameServerscreenappears.
15. Enterthenameserveraddress,andthenpressEntertoacceptOK.
TheBasicNetworkConfigurationVerificationscreenappears.
16. Verifyyourinformation,andthenpressEnter
toacceptOK.PressEnteragaininthe
secondverificationscreentoaccept.
TheHWClockscreenappears.
17. IntheHWClockscreen,selectHWClockSettoLocalTime,andthenpressEnterto
acceptOK.
Note: It is recommended that all passwords be at least eight characters in length.
Note: For Dragon-EAL, static is recommended; however, you must evaluate your
network environment.
Note: If there are existing default IP addresses, delete them before you enter the IP
address of the appliance.