Installation guide

3-2 Dragon Intrusion Defense System Setup
Create a User Account
Ifyoudon’talreadyhaveauseraccount:
1. GototheEnterasysNetworksDragonSupportSite,https://dragon.enterasys.com,to
createanewuseraccount.
Totherightofthescreenisthenewaccountentryarea.ClickSignUp!Onthenext
webpageclickRegister.Anewpageisdisplayed.
Fillintheformcompletelyand
clickonNewUser.Youruserinformation(IDandpassword)isemailedtothe
specifiedaccount.
2. GototheEnterasysNetworksDragonSupportSite,https://dragon.enterasys.com,
againandloginusingtheusernameandpasswordemailedtoyou.
Youareplacedintheprotectedareaof
theDragonSupportsite.AleftsideNavigation
barprovideslinksforallactivities.
3. RefertotheDragonIntrusionDefenseSystemInstallationGuideforlicensekey,andfor
installationinformation.ThisdocumentisavailablefordownloadfromtheDragon
Supportsite.
Commissioning the MSM to Run Dragon
Pleasereadthe“Pre‐CommissioningTasks”onpage 3‐1beforeyoucommissiontheMSM
torunDragon.
TocommissiontheMSMtorunDragon:
1. AccesstheMSMusingyouraccessmethod(forexample,serialconsoleorTelnet).
TheApplianceInstallationscreenappears.
2. Usingthearrowkeys,selectDEMastheappliancetype,
andpressEnter.
Youarereturnedtothecommandprompt.Thismaytakeafewminutes.
3. Typerebootattheprompt.
Aftersometime,theloginpromptappears.
4. Typeroot,andthenpressEntertwice(untilyouget totheNoRootPassword
Detectedscreen).
5. PressEntertoacceptYes.
Note: To upgrade the pre-installed software, go to the Enterasys Networks web site to
download the latest version of the Enterasys Dragon Intrusion Defense System image. For
upgrade instructions, refer to Appendix B, Upgrading Dragon Software.