Installation guide

Installation
Enterasys Matrix Security Module Installation Guide 2-5
Removing the Coverplate
RefertoFigure 2‐2,andperformthefollowing steps:
1. Attachtheantistaticwriststrap(refertotheinstructionsontheantistaticwriststrap
package).
Figure 2-2 Removing the Coverplate
2. RemoveandsavethetwocoverplatescrewsfasteningthecoverplatetotheDFE
modulefrontpanel.
3. Removeandsavethestandofffasteningthecoverplatetothemain
board.
1 DFE module main board 4 Coverplate
2 Coverplate screws (2) 5 DFE module front panel
3 Standoff