Installation guide

Overview
1-2 Matrix Security Module
•DragonNetworkIntrusionDefenseSystem,modelnumbers:
–7S‐DSNSA7‐01(includesexternalpowersupplykit)
–7S‐DSNSA7‐01NPS
ThetypeofDFEmoduleintowhichtheMatrixSecurityModulewillbeinstalled
determineswhetheranexternalpowersupplykitisrequired.
IftheDFEmodulehasaninternalpowersupplyconnectionmounted
totheboard,the
necessaryDCpowerwillbesuppliedinternallytotheMatrixSecurityModulefromthe
DFEmodule,andanexternalpowersupplykitisnotrequired.RefertoFigure 1‐1on
page 1‐2foranillustrationofthefrontpaneloftheMatrixSecu rityModuleshippedwith
7S
‐NSTAG‐01‐NPSand7S‐DSNSA7‐01NPS,whichdonotincludetheexternalpower
supplykit.
IftheDFEmoduledoesnothavetheinternalpowersupplyconnectionmountedtothe
board,thenpowermustbesuppliedexternallytotheMatrixSecurityModule,andthe
modelsincludinganexternalpowersupply
kitshouldbeordered.RefertoFigure 1‐2on
page 1‐3foranillustrationofthefrontpaneloftheMatrixSecu rityModuleshippedwith
7S‐NSTAG‐01and7S‐DSNSA7‐01.
Figure 1-1 Module Front Panel – 7S-NSTAG-01-NPS and 7S-DSNSA7-01NPS
1 Mini-GBIC Gigabit port slots (2) 7 RS232 serial COM port
2 Gigabit port link/activity LEDs 8 CPU power LED
3 USB port 9 CPU reset button
4 10/100 Ethernet port link LED 10 Hard drive activity LED
5 10/100 Ethernet port (see Note below) 11 10/100 Ethernet port activity LED
6 VGA port
Note: The front panel Ethernet port is designed to connect to the DFE module. Do not
connect a PC directly to the Ethernet port. To connect your PC, use a repeater or a hub.
LINK
1
1
2
2
VGA
ACT
ETHERNET 10/100
CONSOLE
CPU/PWR
ACT
RESET
7S-DSNSAT-01
1
2 3 4 5 6 7 8
10
11
9