Installation guide

Unpacking the Chassis
3-4 Matrix N5 PoE Chassis (7C105-P) Installation Guide
3. Removeandsavetheaccessorypackageandanyotherdocuments,and cablefromthe
topofthestyrofoamcap.Theaccessorypackagecontains:
–ElectrostaticDischarge(ESD)wriststrap
– Installationdocumentation
4. Liftandremovethestyrofoamcapfromthetopofthechassis.Saveforreshipping,if
necessary.
5. Openthetopoftheshipping
bagcoveringtheunit.
6. Pullthebagdownaroundtheskid.
7. Removeandsavetheeightscrewsfasteningleftandrightshippingbracketstothe
chassisandtheskid.
8. Liftandremovethechassisfromtheskid.
9. Savetheplasticbagandskidforfuturereshipping,ifnecessary.
Afterunpackingthechassis,
verifythecontentsoftheshipmentwiththoselistedin
Table 3‐1,andperformavisualinspectionofthedevicesforanysignsofphysicaldamage.
ContactEnterasys Networksifthereareanysignsofdamage.Referto“GettingHelp”on
page 1‐10fordetails.
Note: To reship the chassis, refer to Figure 3-1 and perform each step in reverse and in
the reverse order. Ensure that all shipping brackets are used to package the chassis.
Table 3-1 Contents of Enterasys Matrix N5 Chassis Carton
Item Quantity
Enterasys Matrix N5 Chassis 1
Manual Accessory Kit 1
Electrostatic Discharge Wrist Strap 1
Release Notes 1