Installation guide

‡FE-Platinum Series Hardware Installation Guide A-1
A
Specifications
Thisappendixprovidesinformationaboutthefollowing:
EnterasysNetworksreservestherighttochangethespecificationsatanytimewithout
notice.
DFE Module Specifications
Table A‐1providestheInput/Outputports,processorsandmemory,physical,and
environmentalmodulespecificationsforthe7H4385‐49DFEmodule.
For information about... Refer to page...
DFE Module Specifications A-1
COM Port Pinout Assignments A-2
Regulatory Compliance A-3
Table A-1 7H4385-49Specifications
Item Specification
Ports 1 through 48 Forty-eight, 10BASE-T/100BASE-TX ports by way of RJ45
connectors. These ports also support PoE operation.
Option Slot Supports one optional NEM.
Optional Power Input 48 Vdc, 20 A Maximum power input connection from an
Enterasys Matrix N-POE Power System.
Processors/Memory
Processor MPC750CX, 400 MHz processor
Dynamic Random Access Memory
(DRAM)
256 MB
FLASH Memory 32 MB