Installation guide

Completing the Installation
DFE-Platinum Series Hardware Installation Guide 3-27
TheDFE moduleisnowreadytobeconfigured.ForinformationaboutsettingtheIP
addressandconfiguringTelnetsettingsforremoteaccesstoDFEmanagement,referto
Chapter3intheEnterasysMatrixDFE‐PlatinumSeriesConfigurationGuide.TheCLI
commandsenableyoutoinitiallysetupandperformmore
involvedmanagement
configurations.
TheEnterasysMatrixDFE‐PlatinumSeriesConfigurationGuideisavailableonlineat:
http://www.enterasys.com /support/manuals
Ifyourequireassistance,contactEnterasysNetworksusingoneofthemethodsdescribed
in“GettingHelp”onpage xviii.
Figure 3-12 Matrix DFE Startup Screen Example (N7 Chassis)
login: admin
Password:
M A T R I X N7
Command Line Interface
Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA 01810-1008 U.S.A.
Phone: [phone]
E-mail: [e-mail]
WWW: http://www.enterasys.com
(c) Copyright Enterasys Networks, Inc. 2003
Chassis Serial Number: xxxxxxxxxxxx
Chassis Firmware Revision: xx.xx.xx
Matrix N7(su)->