Installation guide

Installing the Device
3-18 Hardware Installation
2. Place the device upside down (as shown in Figure 3-8) on a clean flat surface. Then attach the
strain-relief bracket
➀ to the bottom of the device using the four M4 x 6 mm pan-head screws ➁.
Figure 3-8 Attaching the Strain-Relief Bracket
3.7.3 Rack Mounting the Device
Proceed as follows to install the device into a 19-inch rack:
1. Attach the rackmount brackets
➀ to the device, as shown in Figure 3-9, using the eight
M4 x 6 mm flathead screws
➁ in the rackmount kit.
➀
Strain-Relief Bracket
➁
M4 x 6 mm Pan-Head Screws
3680_03
2
1
4
6
8
10 12 14 16
3
5
7
9 11 13 15
18
17
20
22
24
26 28 30 32
19
21
23
25 27 29 31
34
33
36
38
40
42 44 46 48
35
37
39
41 43 45 47
Reset
Console
PWR
CPU
1H152-51
À
Á