Installation guide

Unpacking the Device
3-2 Hardware Installation
3.2 UNPACKING THE DEVICE
Unpack the device as follows:
1. Open the box and remove the packing material protecting the device.
2. Verify the contents of the carton as listed in Table 3-1.
3. Remove the tape seal on the non-conductive bag to remove the device.
4. Perform a visual inspection of the device for any signs of physical damage. Contact
Enterasys Networks if there are any signs of damage. Refer to Section 1.4 for details.
Table 3-1 Contents of 1H582-51 Carton
Item Quantity
1H582-51 1
RJ45-to-DB9 female adapter 1
Rackmount Kit 1
Cable Management Kit 1
Manual Accessory Kit 1
Power Cord 2