Installation guide

Structure of This Guide
xvi About This Guide
STRUCTURE OF THIS GUIDE
This guide is organized as follows:
Chapter 1, Introduction, provides an overview of the 1H582-xx, the optional Ethernet expansion
modules, and explains how to contact Enterasys Networks for technical support.
Chapter 2, Network Requirements, outlines the network requirements that must be met before
installing the 1H582-xx.
Chapter 3, Hardware Installation, provides instructions on how to install the 1H582-xx on a table
top or into a standard 19-inch rack, and to install optional expansion modules and connect
segments to the device and any installed option.
Chapter 4, Troubleshooting, describes the function of the LANVIEW
®
LEDs, which can help to
quickly diagnose network/operational problems.
Appendix A, Specifications, contains information on port operating specifications, connector
pinouts, environmental requirements, and physical properties for the 1H582-xx, the optional
Ethernet expansion modules and Gigabit Interface Cards (GBICs), and the media they support.
Appendix B, Optional Installations and Mode Switch Bank Settings, describes how to set the
Mode Switch and replace the DRAM SIMM.
Appendix C, GBIC Specifications, lists the specifications and regulatory requirements for the
optional GBIC models (GPIM-01, GPIM-08, and GPIM-09) and the media they support.