Installation guide

Gaining Access to Memory Modules
DFE-Platinum Series Hardware Installation Guide B-13
Figure B-9 Installing the Network Expansion Module (NEM)
3. Usetwoofthesavedcoverplatescrewstofastenthenetworkexpansionmoduletothe
DFE modulefrontpanel,butdonotti ghtenscrewsatthistime.
4. Insertthesavedstandoffthroughthenetworkexpansionmoduletothestandoffon
themainboard.Screwinthestandoff,butdonottightenscrews
atthistime.
5. Tightenthetwocoverplatescrewsfirst,thenthestandoff.
1 NEM 3 NEM connectors 5 Coverplate screws (2)
2 Front panel 4 Main board connectors 6 Standoff