Installation guide

Completing the Installation
3-34 Installation
Completing the Installation of a DFE-Gold Module in an Existing
System
In an established DFE-Gold module system,
• a DFE-Gold module is already established as the management module,
• the passwords have already been set for various users,
• the system IP address is set, and
• other system parameters have been set.
When you install a new DFE-Gold module into a system with an existing configured user
account, the current system settings in that account are already recognized by the new
DFE-Gold module and it will operate accordingly.
If you need to change any settings, you can connect a terminal to the local console port as
described in “Connecting to COM Port for Local Management” on page 3-26 to access
system management, or use a Telnet connection to access the DFE-Gold module system
management as described in Chapter 3 of the Matrix DFE-Gold Series Configuration Guide.
Figure 3-21 Matrix DFE Startup Screen Example (N7 Chassis)
login: admin
Password:
M A T R I X N7 GOLD
Command Line Interface
Enterasys Networks, Inc.
50 Minuteman Rd.
Andover, MA 01810-1008 U.S.A.
Phone: [phone]
E-mail: [e-mail]
WWW: http://www.enterasys.com
(c) Copyright Enterasys Networks, Inc. 2003
Chassis Serial Number: xxxxxxxxxxxx
Chassis Firmware Revision: xx.xx.xx
Matrix N7(su)->