Installation guide

Connecting to COM Port for Local Management

3-30 Installation

5. With a PC connected to a remote modem, you can configure the switch remotely. To

accomplish this, you must configure your PC VT emulation package with the

following parameters.

6. When these parameters are set, the Local Management password screen will display.

Refer to the Matrix DFE-Gold Series Configuration Guide for further information.

Parameter Setting

Mode 7 Bit Control

Transmit Transmit=9600

Bits Parity 8 Bits, No Parity

Stop Bit 1 Stop Bit

Figure 3-20 Connecting to a Modem

1 UTP straight-through cable with RJ45 connectors 4 Local modem

2 RJ45 COM port 5 Remote modem

3 RJ45-to-DB25 modem adapter

RESET

COM

CPU

MGMT

GROUP

SELECT

GROUP

4H4282-49

FAST ENET

ÂÃÀ