Installation guide

Connecting to the Network

3-24 Installation

2. Insert the MT-RJ cable connector into the Mini-GBIC until it clicks into place.

Note: To remove the MT-RJ cable connector, press on its release tab and pull it out of the

Mini-GBIC

connector.

Figure 3-16 Cable Connection to MT-RJ Fiber-Optic Connectors

1 Installed Mini-GBIC MT-RJ connector 4 Receive LED (RX)

2 MT-RJ cable connector 5 Transmit LED (TX)

3 Release tab

ÃÄ