Installation guide

Installing an Optional Mini-GBIC

3-6 Installation

1. Hold the Mini-GBIC with its top side facing up and its 7-pin edge connector facing the

port slot.

2. Carefully align the Mini-GBIC with the port slot.

3. Push the Mini-GBIC into the port slot until the Mini-GBIC “clicks” and locks into

place.

Figure 3-3 Mini-GBIC with MT-RJ Connector

1 Mini-GBIC (MGBIC-MT01) 4 Port slot

2 Mini-GBIC, top side 5 Mini-GBIC, protective dust cover

3 7-Pin edge connector (insertion side) 6 Release tab