Installation guide

Removing the Switch from a Rack
Enterasys G-Series Hardware Installation Guide 3-5
Removing the Switch from a Rack
ToremovetheG‐SeriesEthernetswitchfromarack:
1. Whilesupportingtheswitchsoitdoesnotfall,carefullyremovethemountingscrewsfrom
thetwobracketsthatattachtheswitchtotherack.
2. Ifnecessary,removeeachbracketfromtheswitchbyremoving themountingkitscrewsas
shown
inFigure 2 ‐1onpage 2‐5.