Specifications

Startup and General Configuration Summary
Configuring Power over Ethernet (PoE)
SecureStack B2 Configuration Guide 2-69
2.1.13.2 set inlinepower threshold
Use this command to set the PoE usage threshold on a specified unit.
set inlinepower threshold usage-threshold module-number
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the PoE threshold to 50 on unit 1:
usage-threshold Specifies a PoE threshold as a percentage of total system
power usage. Valid values are 1 - 99.
unit-number Specifies the unit on which to set the PoE threshold.
B2(rw)->set inlinepower threshold 50 1